@mrhisyammm/opencode-antigravity-auth

Antigravity + Gemini CLI OAuth Plugin for Opencode

Enable OpenCode to authenticate against Antigravity (Google's IDE) via OAuth so you can use Antigravity rate limits and access models like gemini-3.5-flash, gemini-3-pro, and claude-opus-4-6-thinking with your Google credentials.

Fork of opencode-antigravity-auth with ESM fix, esbuild single-file bundle, dynamic model detection, and Gemini 3.5 Flash support.

What You Get

• Claude Opus 4.6, Sonnet 4.6 and Gemini 3.5 Flash / 3.1 Pro / 3 Pro / 3 Flash via Google OAuth
• Dynamic model detection — new models are picked up automatically from the backend, no config changes needed
• Multi-account support — add multiple Google accounts, auto-rotates when rate-limited
• Modern Gemini API support — use Antigravity SDK-style API keys / Cloud Projects as Gemini backups or opt-in primary routing
• Legacy Gemini CLI quota support — still available for compatibility and quota fallback
• Thinking models — extended thinking for Claude and Gemini 3 with configurable budgets
• Google Search grounding — enable web search for Gemini models (auto or always-on)
• Auto-recovery — handles session errors and tool failures automatically
• Plugin compatible — works alongside other OpenCode plugins (oh-my-opencode, dcp, etc.)

Fork Differences

This is a fork of NoeFabris/opencode-antigravity-auth with the following improvements:

Installation

Install the @mrhisyammm/opencode-antigravity-auth plugin and add the Antigravity model definitions to ~/.config/opencode/opencode.json by following: https://raw.githubusercontent.com/mrhisyammm/opencode-antigravity-auth/main/README.md

npm install -g @mrhisyammm/opencode-antigravity-auth

npm install @mrhisyammm/opencode-antigravity-auth

opencode run "Hello" --model=google/antigravity-claude-opus-4-6-thinking --variant=max

Models

Model Reference

Antigravity quota (default routing for Claude and Gemini):

Antigravity SDK / Gemini API projects (API-key backed; used by API-key auth, or as OAuth fallback when configured):

The official Antigravity SDK uses GEMINI_API_KEY for local Gemini access. This plugin now supports that path directly for Gemini models while keeping OAuth accounts for Antigravity and Claude.

Legacy Gemini CLI quota (separate from Antigravity; used when cli_first is true or as fallback):

Routing Behavior:

• OAuth Antigravity-first (default): Gemini models use Antigravity quota across OAuth accounts.
• Antigravity SDK / Gemini API: API-key auth, GEMINI_API_KEY, or configured agy_sdk.cloud_projects route Gemini requests through the public Gemini API.
• Legacy CLI-first (cli_first: true): Gemini models use the legacy Gemini CLI quota first.
• When OAuth quota pools are exhausted, configured agy_sdk.cloud_projects are used as backup capacity before failing if agy_sdk.enabled: true, agy_sdk.api_key_fallback: true, and usable API-key credentials are present.
• Claude and image models always use Antigravity. Model names are automatically transformed for the target API (e.g., antigravity-gemini-3-flash → gemini-3-flash-preview for CLI).

Using variants:

opencode run "Hello" --model=google/antigravity-claude-opus-4-6-thinking --variant=max

For details on variant configuration and thinking levels, see docs/MODEL-VARIANTS.md.

{
  "$schema": "https://opencode.ai/config.json",
  "plugin": ["@mrhisyammm/opencode-antigravity-auth@latest"],
  "provider": {
    "google": {
      "models": {
        "antigravity-gemini-3-pro": {
          "name": "Gemini 3 Pro (Antigravity)",
          "limit": { "context": 1048576, "output": 65535 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] },
          "variants": {
            "low": { "thinkingLevel": "low" },
            "high": { "thinkingLevel": "high" }
          }
        },
        "antigravity-gemini-3.1-pro": {
          "name": "Gemini 3.1 Pro (Antigravity)",
          "limit": { "context": 1048576, "output": 65535 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] },
          "variants": {
            "low": { "thinkingLevel": "low" },
            "high": { "thinkingLevel": "high" }
          }
        },
        "antigravity-gemini-3-flash": {
          "name": "Gemini 3 Flash (Antigravity)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] },
          "variants": {
            "minimal": { "thinkingLevel": "minimal" },
            "low": { "thinkingLevel": "low" },
            "medium": { "thinkingLevel": "medium" },
            "high": { "thinkingLevel": "high" }
          }
        },
        "antigravity-gemini-3.5-flash": {
          "name": "Gemini 3.5 Flash (Antigravity)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] },
          "variants": {
            "minimal": { "thinkingLevel": "minimal" },
            "low": { "thinkingLevel": "low" },
            "medium": { "thinkingLevel": "medium" },
            "high": { "thinkingLevel": "high" }
          }
        },
        "antigravity-claude-sonnet-4-6": {
          "name": "Claude Sonnet 4.6 (Antigravity)",
          "limit": { "context": 200000, "output": 64000 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "antigravity-claude-opus-4-6-thinking": {
          "name": "Claude Opus 4.6 Thinking (Antigravity)",
          "limit": { "context": 200000, "output": 64000 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] },
          "variants": {
            "low": { "thinkingConfig": { "thinkingBudget": 8192 } },
            "max": { "thinkingConfig": { "thinkingBudget": 32768 } }
          }
        },
        "gemini-2.5-flash": {
          "name": "Gemini 2.5 Flash (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-2.5-pro": {
          "name": "Gemini 2.5 Pro (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-3-flash-preview": {
          "name": "Gemini 3 Flash Preview (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-3.5-flash": {
          "name": "Gemini 3.5 Flash (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65536 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-3-pro-preview": {
          "name": "Gemini 3 Pro Preview (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65535 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-3.1-pro": {
          "name": "Gemini 3.1 Pro (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65535 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        },
        "gemini-3.1-pro-preview-customtools": {
          "name": "Gemini 3.1 Pro Preview Custom Tools (Gemini CLI)",
          "limit": { "context": 1048576, "output": 65535 },
          "modalities": { "input": ["text", "image", "pdf"], "output": ["text"] }
        }
      }
    }
  }
}

Multi-Account Setup

Add multiple Google accounts for a higher combined quota. The plugin automatically rotates between accounts when one is rate-limited.

opencode auth login  # Run again to add more accounts

Account management options (via opencode auth login):

• Configure models — Auto-configure all plugin models in opencode.json
• Check quotas — View remaining API quota for each account
• Manage accounts — Enable/disable specific accounts for rotation

For details on load balancing, dual quota pools, and account storage, see docs/MULTI-ACCOUNT.md.

Troubleshooting

Quick Reset: Most issues can be resolved by deleting ~/.config/opencode/antigravity-accounts.json and running opencode auth login again.

Configuration Path (All Platforms)

OpenCode uses ~/.config/opencode/ on all platforms including Windows.

Windows users: ~ resolves to your user home directory (e.g., C:\Users\YourName). Do NOT use %APPDATA%.

Custom path: Set OPENCODE_CONFIG_DIR environment variable to use a custom location.

Windows migration: If upgrading from plugin v1.3.x or earlier, the plugin will automatically find your existing config in %APPDATA%\opencode\ and use it. New installations use ~/.config/opencode/.

Multi-Account Auth Issues

If you encounter authentication issues with multiple accounts:

1. Delete the accounts file:

   rm ~/.config/opencode/antigravity-accounts.json

2. Re-authenticate:

   opencode auth login

403 Permission Denied (rising-fact-p41fc)

Error:

Permission 'cloudaicompanion.companions.generateChat' denied on resource 
'//cloudaicompanion.googleapis.com/projects/rising-fact-p41fc/locations/global'

Cause: Plugin falls back to a default project ID when no valid project is found. This works for Antigravity but fails for Gemini CLI models.

Solution:

1. Go to Google Cloud Console
2. Create or select a project
3. Enable the Gemini for Google Cloud API (cloudaicompanion.googleapis.com)
4. Add projectId to your accounts file:

   {
     "accounts": [
       {
         "email": "your@email.com",
         "refreshToken": "...",
         "projectId": "your-project-id"
       }
     ]
   }

Note: Do this for each account in a multi-account setup.

Gemini Model Not Found

Add this to your google provider config:

{
  "provider": {
    "google": {
      "npm": "@ai-sdk/google",
      "models": { ... }
    }
  }
}

Gemini 3 Models 400 Error ("Unknown name 'parameters'")

Error:

Invalid JSON payload received. Unknown name "parameters" at 'request.tools[0]'

Causes:

• Tool schema incompatibility with Gemini's strict protobuf validation
• MCP servers with malformed schemas
• Plugin version regression

Solutions:

1. Update to latest beta:

   { "plugin": ["@mrhisyammm/opencode-antigravity-auth@latest"] }

2. Disable MCP servers one-by-one to find the problematic one

3. Add npm override:

   { "provider": { "google": { "npm": "@ai-sdk/google" } } }

MCP Servers Causing Errors

Some MCP servers have schemas incompatible with Antigravity's strict JSON format.

Common symptom:

Invalid function name must start with a letter or underscore

Sometimes it shows up as:

GenerateContentRequest.tools[0].function_declarations[12].name: Invalid function name must start with a letter or underscore

This usually means an MCP tool name starts with a number (for example, a 1mcp key like 1mcp_*). Rename the MCP key to start with a letter (e.g., gw) or disable that MCP entry for Antigravity models.

Diagnosis:

1. Disable all MCP servers in your config
2. Enable one-by-one until error reappears
3. Report the specific MCP in a GitHub issue

"All Accounts Rate-Limited" (But Quota Available)

Cause: Cascade bug in clearExpiredRateLimits() in hybrid mode (fixed in recent beta).

Solutions:

1. Update to latest beta version
2. If persists, delete accounts file and re-authenticate
3. Try switching account_selection_strategy to "sticky" in antigravity.json

Session Recovery

If you encounter errors during a session:

1. Type continue to trigger the recovery mechanism
2. If blocked, use /undo to revert to pre-error state
3. Retry the operation

Using with Oh-My-OpenCode

Important: Disable the built-in Google auth to prevent conflicts:

// ~/.config/opencode/oh-my-opencode.json
{
  "google_auth": false,
  "agents": {
    "frontend-ui-ux-engineer": { "model": "google/antigravity-gemini-3-pro" },
    "document-writer": { "model": "google/antigravity-gemini-3-flash" }
  }
}

Infinite .tmp Files Created

Cause: When account is rate-limited and plugin retries infinitely, it creates many temp files.

Workaround:

1. Stop OpenCode
2. Clean up: rm ~/.config/opencode/*.tmp
3. Add more accounts or wait for rate limit to expire

OAuth Callback Issues

# Find process using the port
lsof -i :51121

# Kill if stale
kill -9 <PID>

# Retry
opencode auth login

netstat -ano | findstr :51121
taskkill /PID <PID> /F
opencode auth login

ssh -L 51121:localhost:51121 user@remote

Configuration Key Typo: plugin not plugins

The correct key is plugin (singular):

{
  "plugin": ["@mrhisyammm/opencode-antigravity-auth@latest"]
}

Not "plugins" (will cause "Unrecognized key" error).

Migrating Accounts Between Machines

When copying antigravity-accounts.json to a new machine:

1. Ensure the plugin is installed: "plugin": ["@mrhisyammm/opencode-antigravity-auth@latest"]
2. Copy ~/.config/opencode/antigravity-accounts.json
3. If you get "API key missing" error, the refresh token may be invalid — re-authenticate

Known Plugin Interactions

For details on load balancing, dual quota pools, and account storage, see docs/MULTI-ACCOUNT.md.

Plugin Compatibility

@tarquinen/opencode-dcp

DCP creates synthetic assistant messages that lack thinking blocks. List this plugin BEFORE DCP:

{
  "plugin": [
    "@mrhisyammm/opencode-antigravity-auth@latest",
    "@tarquinen/opencode-dcp@latest"
  ]
}

oh-my-opencode

Disable built-in auth and override agent models in oh-my-opencode.json:

{
  "google_auth": false,
  "agents": {
    "frontend-ui-ux-engineer": { "model": "google/antigravity-gemini-3-pro" },
    "document-writer": { "model": "google/antigravity-gemini-3-flash" },
    "multimodal-looker": { "model": "google/antigravity-gemini-3-flash" }
  }
}

Tip: When spawning parallel subagents, enable pid_offset_enabled: true in antigravity.json to distribute sessions across accounts.

Plugins you don't need

• gemini-auth plugins — Not needed. This plugin handles all Google OAuth.

Configuration

Create ~/.config/opencode/antigravity.json for optional settings:

{
  "$schema": "https://raw.githubusercontent.com/mrhisyammm/opencode-antigravity-auth/main/assets/antigravity.schema.json"
}

Most users don't need to configure anything — defaults work well.

Model Behavior

Antigravity SDK / Gemini API keys

The official Antigravity SDK quickstart uses GEMINI_API_KEY. You can provide one key via environment variable:

GEMINI_API_KEY=your-key opencode run "Hello" --model=google/gemini-3-pro

For multiple Cloud Projects / API keys, add them to ~/.config/opencode/antigravity.json:

{
  "agy_sdk": {
    "api_key_fallback": true,
    "prefer_for_gemini": false,
    "cloud_projects": [
      { "label": "primary", "project_id": "my-project", "api_key": "..." },
      { "label": "backup", "project_id": "my-backup-project", "api_key": "..." }
    ]
  }
}

Keep this file private: API keys are stored in your local OpenCode config and are sent to Gemini with the x-goog-api-key header, never in the request URL. Do not commit antigravity.json with real keys.

Set prefer_for_gemini: true if you want Gemini models to use the newer Gemini API path before OAuth-backed Antigravity. OAuth multi-account rotation remains active for Antigravity/Claude and as fallback when prefer_for_gemini keys are unavailable. cli_first remains the legacy Gemini CLI compatibility mode.

Account Rotation

Quota Protection

How it works: Quota cache is refreshed automatically after API requests (when older than quota_refresh_interval_minutes) and manually via "Check quotas" in opencode auth login. The threshold check uses soft_quota_cache_ttl_minutes to determine cache freshness - if cache is older, the account is considered "unknown" and allowed (fail-open). When ALL accounts exceed the threshold, the plugin waits for the earliest quota reset time (like rate limit behavior). If wait time exceeds max_rate_limit_wait_seconds, it errors immediately.

Rate Limit Scheduling

Control how the plugin handles rate limits:

When to use each mode:

• cache_first (default): Best for long conversations. Waits for the same account to recover, preserving your prompt cache.
• balance: Best for quick tasks. Switches accounts immediately when rate-limited for maximum availability.
• performance_first: Best for many short requests. Distributes load evenly across all accounts.

App Behavior

For all options, see docs/CONFIGURATION.md.

Environment variables:

OPENCODE_CONFIG_DIR=/path/to/config opencode  # Custom config directory
OPENCODE_ANTIGRAVITY_DEBUG=1 opencode         # Enable debug file logging
OPENCODE_ANTIGRAVITY_DEBUG=2 opencode         # Verbose debug file logging
OPENCODE_ANTIGRAVITY_DEBUG_TUI=1 opencode     # Enable TUI log panel debug output

Troubleshooting

See the full Troubleshooting Guide for solutions to common issues including:

• Auth problems and token refresh
• "Model not found" errors
• Session recovery
• Gemini CLI permission errors
• Safari OAuth issues
• Plugin compatibility
• Migration guides

Documentation

• Configuration — All configuration options
• Multi-Account — Load balancing, dual quota pools, account storage
• Model Variants — Thinking budgets and variant system
• Troubleshooting — Common issues and fixes
• Architecture — How the plugin works
• API Spec — Antigravity API reference

Credits

• opencode-antigravity-auth by @NoeFabris — original plugin
• opencode-gemini-auth by @jenslys
• CLIProxyAPI

License

MIT License. See LICENSE for details.